 |
 |
 |
|
Get our training and event bulletin once a month by email.
Our free newsletter, mailed quarterly, focuses on automated test, data acquisition, and control solutions that increase productivity, improve accuracy, and reduce costs.
- Teamwork for System Development,
by C.G. Masi, Senior Editor (Control Engineering, May 2007)
- Car Stereos Get Benched,
by Martin Rowe, Senior Technical Editor (Test & Measurement World, April 2006)
- Anatomy of a Switch,
by Tom Lecklider, Senior Technical Editor (Evaluation Engineering, April 2006)
- System Integration for Fun and Profit, by Bob Stasonis (PXI Technology Review, Summer-Fall 2004)
- Using a Simple State Machine Template, by Keith Brainard, Project Engineer (LabVIEW Technical Resource, Vol. 11, No. 4)
- Strobe Light Helps Freeze Solder Balls, by C.G. Masi, Contributing Editor
(Vision Systems Design, November 2001)
- Automated Resistance Test and Sort Machine, by Peter Blume, Bloomy Controls;
Brian Kochan and Kevin Boette, Saint-Gobain Igniter Products
(Desktop Engineering, March 2002)
- Outsourcing ATE Development, by Matthew Kennedy, Engineering Manager
(presented at Nepcon East 2002)
- Divide and Conquer Optical Measurements, by Martin Rowe, Senior Technical Editor (Test & Measurement World, May 2003)
- PXI-Based, Multipurpose, Mobile DAQ Station, by Robert Gough, Project Engineer (PXI Technology Review, Spring 2003)
- Automating PCB Functional Test, by Matthew Kennedy and Greg Burroughs, Bloomy Controls; and Elaine Fasoli Bailey, Lifeline Systems (Evaluation Engineering, July 2003)
- Automated Inspection Guarantees Color, by C.G. Masi, Contributing Editor
(Vision Systems Design, November 2003)
- Bloomy DAQ System Profiles Jet Engine Performance, (Instrumentation Newsletter, Q3 2004)
- PC-Based Instruments: Not Just Hype, by Peter Blume, President (Electronic Design Online, July 14, 2004
|
|
|
These LabVIEW VIs may be downloaded and used without obligation or licensing. They are provided as-is without guarantee or warranty. Bloomy Controls is not liable for damage to equipment or injury to persons resulting from use of these VIs.
| LabVIEW VI |
Size |
Resource Notes: |
| LabVIEW Object Oriented Programming Example
|
194 KB |
The Dynamic Dispatch example demonstrates the use of LabVIEW Object Oriented Programming by drawing two shapes onto a 2D Picture control. This example is a companion to the LabVIEW Object Oriented Programming presentation by Shaun Hayward. (Download this presentation under "Presentations".) |
|
|
|
 |
|
 |
Call 860-298-9925 to put our experienced team to work for you. |
|
 |
 |
|
|
See automation and control systems we've developed for customers. |
|
  |
 |
|
|
"Our original cable thermal test system was limited
in capacity, cumbersome to use, and the data it produced was difficult
to work with. Bloomy Controls totally re-architected the system’s
software and expanded our test capabilities beyond what we previously
thought was possible with our existing equipment. The results: we’ve
increased our throughput by 300%, test configuration and setup has been
vastly simplified, and the data handling and report generation are
completely automatic. Over 30 hours of tedious manual labor has been
eliminated for each test run."
David Slack
Engineering Manager
Times Microwave Systems |
|
  |
|
|
|
PRIVACY POLICY